The AirStart™ 10 CPAP is a basic, easy to use CPAP machine for those looking to add a second machine to a travel residence, or for those who prefer a machine with simplicity. The AirStart™ 10 includes comfort features such as built-in humidification and exhalation relief.
LCD Color Display
HumidAir™ Heated Humidifier
Expiratory Pressure Relief (EPR™)
Additional Comfort Features
Compliance Data to SD Card
LCD Color Display with Simplistic Menu
The AirStart™ 10 CPAP is a simplified CPAP machine with basic features accessed through the machine's menu. From the display the user can adjust settings such a ramp, EPR, and humidity level. During therapy the display will show the current pressure and humidity level, before going black after a short period of time to avoid extra light in a dark room. Once therapy is completed, the usage hours are displayed.
HumidAir™ Built-In Heated Humidifier
The HumidAir™ Heated Humidifier is built-in to the AirStart™ 10 CPAP Machine to provide warmth and moisture to therapy air on a nightly basis, if desired. The water chamber attaches to the humidifier at the side of the machine and is easily taken out and apart for filling and cleaning. The machine menu features a warm up option to preheat the humidifier so that it is warm at the onset of therapy.
If using the AirStart™ 10 CPAP without the heated humidifier, the Side Cover for AirSense™ 10, AirStart™ 10, and AirCurve™ 10 Machines (not included) must be installed at the end of the machine in place of the water chamber.
EPR™ & Additional Comfort Features
The AirStart™ 10 CPAP includes comfort features that users have come to expect and rely on. Expiratory Pressure Relief (EPR™) allows a drop in pressure for easier exhalation. Ramp allows an increase to prescribed pressure over a set amount of time at the beginning of a therapy session.
Compliance Data to SD Card
The AirStart™ 10 CPAP records basic compliance data to the included SD card. The SD card can be removed and given to a physician for therapy tracking.
Return On Warranty Issues Only
This Product Includes...
AirStart 10 CPAP Machine
Built-In HumidAir Heated Humidifier
Standard Water Chamber
Standard 19mm Tubing
SD Card (Installed)
1 - Standard Filter (Installed)
Power Supply and Cord
Weight - Machine with Water Chamber: 2.53 lbs (40.5 oz.)
Dimensions - Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H
Weight - Standard Chamber: .54 lb
Weight - Machine with optional Side Cover (Without Water Chamber): Approx. 2.452 lbs
Dimensions - Machine with optional Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H
Dimensions - Travel Bag: 13.24 in L x 10 in W x 5 in H
Weight - Travel Bag Alone: 1.18 lb
Weight - Machine with Humidifier; Power Supply and Cord; Standard Tube; Travel Bag: Approximately 5.1 lbs
Sound Level: 26.6 dBA
Water Chamber Capacity: 380 mL
Weight - 90W Power Supply, Cord and Plug: 1.29 lb
Dimensions - 90W Power Supply Only (Not including Cor or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in
AC Input Range - 90W Power Supply: 100 - 240V, 50 - 60Hz, 1.0 - 1.5A, Class II
DC Output - 90 W Power Supply: 24V --- 3.75A
Typical Power Consumption: 53W (57VA)
Peak Power Consumption: 104W (108VA)
Operating Pressure: 4 - 20 cm H2O (0.2 cm increments)
Length - Standard Tubing: 6.5 Feet
Materials - Standard Tubing: Flexible Plastic
Materials - Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal
Materials - Standard Filter: Polyester non-woven fiber
Operating Temperature: 41° F - 95° F (5° C - 35° C)
Storage and Transport Temperature: -4° F - 140° F (-20° C - 60° C)
Operating Humidity: 10% - 95% Relative Humidity, non-condensing
Storage and Transport Humidity: 5% - 95% relative Humidity, non-condensing
Operating Altitude: Sea Level - 8500 Feet (2,591 M); Air pressure range 1013 hPa - 738 hPa
Maximum Temperature - Heating Plate: 154° F (68° C)
Maximum Temperature - Cut Out: 165° F (74° C)
Maximum Gas Temperature: Less than or Equal to 106° F (? 41° C)
IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22
Machine Warranty: 2 Years
Patient Weight: Greater than 66 lbs
The chamber should be taken apart and hand washed weekly using warm water and a mild detergent. It should be rinsed well and allowed to air dry out of direct sunlight before reassembling. The chamber should not be washed in a dishwasher or washing machine. The SlimLine hose should be washed in the same manner and allowed to completely dry out of direct sunlight before reattaching to the machine and mask.
Required Settings: 1 Pressure Setting is Required
Unless directed otherwise, CPAP.com will leave this machine at its default settings of:
Ramp: 20 mins
Start Pressure: 4 cm H2O
Humidity Level: 4
Mask Type: Pillows
This is custom tab. You can add custom tab as an attribute for entire products, or for each categories. You can add CMS content such as sizing guide or videos to enhance product detail.